Description
Standard | NEMA MG-1 |
---|---|
Frequency | 60 Hz |
Voltage | 200/400 V |
Number of poles | 6 |
Degree of Protection | IP55 |
Synchronous speed | 1200 rpm |
Output rating | 1 HP |
Mounting | W-6 |
Flange | C |
Terminal box¹ | Left position |
Enclosure | IC411 - TEFC |
Electric Motors
Frame | 143/5TC |
---|---|
Output | 1 HP (0.75 kW) |
Number of Poles | 6 |
Frequency | 60 Hz |
Rated speed | 1145 rpm |
Slip | 4.58 % |
Rated voltage | 200/400 V |
Rated current | 3.63/1.82 A |
L. R. Amperes | 21.1/10.5 A |
LRC | 5.8x(Code J) |
No load current | 2.33/1.16 A |
Rated torque | 4.59 ft.lb |
Locked rotor torque | 229 % |
Breakdown torque | 280 % |
Locked rotor time | 55s (cold) 31s (hot) |
Moment of inertia (J) | 0.1597 sq.ft.lb |
Design | B |
Insulation Class | F |
Service factor | 1.15 |
Temperature rise | 80 K |
Duty Cycle | Cont.(S1) |
Starting Method | Direct On Line |
Ambient temperature | -20°C to +40°C |
Altitude | 1000 m.a.s.l. |
Degree of Protection | IP55 |
Enclosure | IC411 - TEFC |
Mounting | W-6 |
Rotation¹ | Both (CW and CCW) |
Noise level² | 50.0 dB(A) |
Approx. weight³ | 38.2 lb |
Efficiency
50% | 80.0 |
---|---|
75% | 82.5 |
100% | 82.5 |
Power factor
50% | 0.50 |
---|---|
75% | 0.63 |
100% | 0.72 |
Features
Frame Material | Rolled Steel |
---|---|
Impregnation Method | Dip and Bake Polyester |
Main terminal box hole | 1.118" |
Terminal Block | Without |
Drain | Rubber, automatic |
Shaft Material | SAE 1040/45 Carbon Steel |
Painting | Munsell N 1 - Matte 207N (ISO 12944 - C2) |
Grounding Lugs | Single |
Fan Cover material | Steel |
Tropicalized Painting | Without |
Fan material | Plastic |
Bearing cap | Yes- Bearing Cap |
Bolt Material | Carbon Steel |
Balancing Method | 1/2 Key |
Drip Cover | With |
Resilient Base | Without |
Overload protector (phenolic) | Without overload protector |
Connection Cables Quantity | 12 |
Features
Frame Material | Rolled Steel |
---|---|
Impregnation Method | Dip and Bake Polyester |
Main terminal box hole | 1.118" |
Terminal Block | Without |
Drain | Rubber, automatic |
Shaft Material | SAE 1040/45 Carbon Steel |
Painting | Munsell N 1 - Matte 207N (ISO 12944 - C2) |
Grounding Lugs | Single |
Fan Cover material | Steel |
Tropicalized Painting | Without |
Fan material | Plastic |
Bearing cap | Yes- Bearing Cap |
Bolt Material | Carbon Steel |
Balancing Method | 1/2 Key |
Drip Cover | With |
Resilient Base | Without |
Overload protector (phenolic) | Without overload protector |
Connection Cables Quantity | 12 |
Downloads
- W01 Rolled Steel Integral Horsepower Motors
- W40 - Open Induction Motors (NEMA Market)
- USA Linecard 2020
- US100 Standard Catalog Single Phase and Three Phase General Purpose Motors
- US100 Standard Catalog Washdown, Fractional and Air Handling Motors
- US100 Standard Stock Catalog Complete
- W22 & W01 - Single-Phase Integral Horsepower Motors
- US100 Electrical and Mechanical Data