W40 is a platform of Open Drip Proof motors (ODP) designed for industrial application in order to have a compact and light solution for the customer.
| Standard |
NEMA MG-1 |
| Frequency |
60 Hz |
| Voltage |
380 V |
| Number of poles |
2 |
| Degree of Protection |
IP23 |
| Synchronous speed |
3600 rpm |
| Output rating |
300 HP |
| Mounting |
F-1 |
| Flange |
Without |
| Terminal box¹ |
Left position |
| Enclosure |
IC01 - ODP |
Electric Motors
| Frame |
447/9TS |
| Output |
300 HP (220 kW) |
| Number of Poles |
2 |
| Frequency |
60 Hz |
| Rated speed |
3570 rpm |
| Slip |
0.83 % |
| Rated voltage |
380 V |
| Rated current |
400 A |
| L. R. Amperes |
2640 A |
| LRC |
6.6x(Code G) |
| No load current |
93.0 A |
| Rated torque |
441 ft.lb |
| Locked rotor torque |
140 % |
| Breakdown torque |
240 % |
| Locked rotor time |
54s (cold) 30s (hot) |
| Moment of inertia (J) |
32.7 sq.ft.lb |
| Design |
B |
| Insulation Class |
F |
| Service factor |
1.15 |
| Temperature rise |
80 K |
| Duty Cycle |
Cont.(S1) |
| Starting Method |
Direct On Line |
| Ambient temperature |
-20°C to +40°C |
| Altitude |
1000 m.a.s.l. |
| Degree of Protection |
IP23 |
| Enclosure |
IC01 - ODP |
| Mounting |
F-1 |
| Rotation¹ |
Both (CW and CCW) |
| Noise level² |
85.0 dB(A) |
| Approx. weight³ |
1819 lb |
Efficiency
| 50% |
94.5 |
| 75% |
95.0 |
| 100% |
95.0 |
Power factor
| 50% |
0.82 |
| 75% |
0.87 |
| 100% |
0.88 |
Features
| Frame Material |
Cast Iron |
| Impregnation Method |
Constant Resin Flow |
| Regreasing System |
At Drive end and Non-drive end |
| Main terminal box hole |
2xNPT 3" |
| Terminal Block |
Without |
| Shaft Locking Device |
Without |
| Shaft Material |
SAE 4140 Carbon Steel |
| Painting |
RAL 3002 203A (ISO 12944 - C2) |
| Grounding Lugs |
Double |
| Fan Cover material |
Without Fan Cover |
| Tropicalized Painting |
Without |
| Fan material |
Without fan |
| Bearing cap |
Yes- Bearing Cap |
| Bolt Material |
Carbon Steel |
| Winding thermal protection |
Thermistor - 2 wires 1 per phase 155°C |
| Balancing Method |
1/2 Key |
| Drip Cover |
Without |
| Overload protector (phenolic) |
Without overload protector |
| Connection Cables Quantity |
6 |
Features
| Frame Material |
Cast Iron |
| Impregnation Method |
Constant Resin Flow |
| Regreasing System |
At Drive end and Non-drive end |
| Main terminal box hole |
2xNPT 3" |
| Terminal Block |
Without |
| Shaft Locking Device |
Without |
| Shaft Material |
SAE 4140 Carbon Steel |
| Painting |
RAL 3002 203A (ISO 12944 - C2) |
| Grounding Lugs |
Double |
| Fan Cover material |
Without Fan Cover |
| Tropicalized Painting |
Without |
| Fan material |
Without fan |
| Bearing cap |
Yes- Bearing Cap |
| Bolt Material |
Carbon Steel |
| Winding thermal protection |
Thermistor - 2 wires 1 per phase 155°C |
| Balancing Method |
1/2 Key |
| Drip Cover |
Without |
| Overload protector (phenolic) |
Without overload protector |
| Connection Cables Quantity |
6 |
Downloads
