Description
Specs
| Catalog Number | ZDM3587T-5 |
|---|---|
| Enclosure | TEBC |
| Frame | 145TC |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | BLOWER |
| Current @ Voltage | 2.200 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 86.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | ENCODER |
| High Voltage Full Load Amps | 2.2 a |
| Front Face Code | Encoder/Feedback Device |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Inverter Ready |
| KVA Code | M |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 6000 rpm |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
| Motor Type | 0534M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 19.15 IN |
| Power Factor | 79 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT NO | ZDM3587T-5 |
|---|---|
| SPEC. | 05E535X555G1 |
| FRAME | 145TC |
| VOLTS | 575 |
| MAG CUR | 1.27 |
| RPM | 1760 |
| HZ | 60 |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 86.5 |
| BLWR V | 115 |
| RATING | 40C AMB-CONT |
| DE BRG | 6205 |
| CC | 010A |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 12.8 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 56° C |
| Start Configuration | DOL |
| Break-Down Torque | 25.71 LB-FT |
| Pull-Up Torque | 15.03 LB-FT |
| Locked-Rotor Torque | 18.22 LB-FT |
| Starting Current | 21.07 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 36.0 | 58.0 | 71.0 | 79.0 | 83.0 | 86.0 | 0.0 | ||
| Efficiency | 0.0 | 79.2 | 86.2 | 87.4 | 86.9 | 85.6 | 83.8 | 0.0 | ||
| Speed (RPM) | 1,799 | 1,789 | 1,780 | 1,771 | 1,760 | 1,748 | 1,735 | 0 | ||
| Line Amps | 1.27 | 1.32 | 1.52 | 1.82 | 2.20 | 2.64 | 3.12 | 0.00 |
