Description
Specs
| Catalog Number | YPC245A |
|---|---|
| Enclosure | TEAO |
| Frame | 56YZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Oil Capacitor Start and Run |
| Output @ Frequency | .330 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Yoke Pedestal |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.400 A @ 115.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 66.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.4 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | B |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | None |
| Motor Lead Quantity/Wire Size | 5 @ 18 AWG |
| Motor Type | 3411C |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 10.68 IN |
| Power Factor | 96 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Flat Only (When Non-STD) |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible: Connected Standard |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1625 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | WG |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | YPC245A |
|---|---|
| SPEC. | 34M197R235G1 |
| HP | .33 |
| VOLTS | 115 |
| AMP | 3.4 |
| RPM | 1625 |
| FRAME | 56YZ |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 66 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Line-Line Res. @ 25° C | 4.3109 Ohms A Ph / 10.741 Ohms B Ph |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 1.59 LB-FT |
| Pull-Up Torque | 0.321 LB-FT |
| Locked-Rotor Torque | 0.363 LB-FT |
| Starting Current | 9.58 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 81.0 | 91.0 | 94.0 | 96.0 | 96.0 | 96.0 | 95.0 | 0.0 | ||
| Efficiency | 0.0 | 44.4 | 61.8 | 67.8 | 68.3 | 63.5 | 56.1 | 0.0 | ||
| Speed (RPM) | 1,794 | 1,769 | 1,745 | 1,714 | 1,670 | 1,611 | 1,528 | 0 | ||
| Line Amps | 1.01 | 1.47 | 1.96 | 2.58 | 3.35 | 4.31 | 4.93 | 0.00 |
