Description
Specs
| Catalog Number | XT3016T-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 145T |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | CLI GP A,B,C,D |
| XP Division | Division II |
| Agency Approvals | CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 3 |
| Current @ Voltage | 1.400 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 82.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 1.4 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 0526M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 12.54 IN |
| Power Factor | 63 |
| Product Family | General Purpose |
| Pulley Face Code | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 0.875 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1160 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T4 |
Drawings
Nameplate
| CAT.NO. | XT3016T-5 |
|---|---|
| SPEC. | 05-0000-0994 |
| FRAME | 145T |
| VOLTS | 575 |
| F.L. AMPS | 1.4 |
| R.P.M. | 1160 |
| HZ. | 60 |
| SER.F. | 1.00 |
| NEMA NOM. EFF. | 82.5 |
| DE | 6205 |
| MAG. CUR. | 1 |
| INV TYPE | PWM |
| CT | 3 |
| CC | 010A |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 24.8 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 30° C |
| Start Configuration | DOL |
| Break-Down Torque | 15.4 LB-FT |
| Pull-Up Torque | 9.79 LB-FT |
| Locked-Rotor Torque | 12 LB-FT |
| Starting Current | 8.96 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 26.0 | 42.0 | 55.0 | 63.0 | 69.0 | 73.0 | 0.0 | ||
| Efficiency | 0.0 | 69.5 | 80.2 | 83.0 | 83.5 | 82.7 | 81.2 | 0.0 | ||
| Speed (RPM) | 1,199 | 1,191 | 1,182 | 1,172 | 1,163 | 1,151 | 1,136 | 0 | ||
| Line Amps | 0.97 | 1.01 | 1.11 | 1.25 | 1.41 | 1.63 | 1.90 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
| HW4600B32SP | V-RING SLINGER 1.000 X 1.540 X .24 VITON |
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X .75 |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
