Description
Specs
| Catalog Number | XM18342T-5 |
|---|---|
| Enclosure | XPFC |
| Frame | 182T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | CSA EEV UL |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 1.3 |
| Current @ Voltage | 3.300 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.3 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Max Speed | 2700 rpm |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 16 AWG |
| Motor Type | X3632M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 18.93 IN |
| Power Factor | 75 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 36R726S582G1 |
|---|---|
| CAT.NO. | XM18342T-5 |
| HP | 3 |
| VOLTS | 575 |
| AMPS | 3.3 |
| RPM | 1760 |
| HZ | 60 |
| SER.F. | 1.00 |
| FRAME | 182T |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 5.97 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 41° C |
| Start Configuration | DOL |
| Break-Down Torque | 33.8 LB-FT |
| Pull-Up Torque | 19.5 LB-FT |
| Locked-Rotor Torque | 23 LB-FT |
| Starting Current | 25.9 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 34.0 | 55.0 | 68.0 | 75.0 | 79.0 | 82.0 | 0.0 | ||
| Efficiency | 0.0 | 77.1 | 85.5 | 87.9 | 88.3 | 87.9 | 86.8 | 0.0 | ||
| Speed (RPM) | 1,800 | 1,791 | 1,782 | 1,772 | 1,762 | 1,750 | 1,737 | 0 | ||
| Line Amps | 1.90 | 2.04 | 2.36 | 2.80 | 3.37 | 4.00 | 4.70 | 0.00 |
Parts
| 36FN3000C01SP | EXFN, PLASTIC, 5.25 OD, .912 ID |
|---|---|
| 35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
