Description
Specs
| Catalog Number | XM140762TA |
|---|---|
| Enclosure | XPFC |
| Frame | 143T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 208.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | CSA UL |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.000 A @ 208.0 V 2.800 A @ 230.0 V 1.400 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 77.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 1.4 a |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3524M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 15.21 IN |
| Power Factor | 63 |
| Product Family | General Purpose |
| Pulley Face Code | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1140 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
| XP Temp Code | T4 |
Drawings
Nameplate
| SPEC | 35-0000-1076 |
|---|---|
| CAT.NO. | XM140762TA |
| H.P. | .75 |
| VOLTS | 208-230/460 |
| AMPS | 3-2.8/1.4 |
| R.P.M. | 1140 35WGY025 |
| HZ | 60 |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| FRAME | 143T |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 26 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 43° C |
| Temp. Rise @ S.F. Load | 51° C |
| Start Configuration | DOL |
| Break-Down Torque | 13 LB-FT |
| Pull-Up Torque | 10 LB-FT |
| Locked-Rotor Torque | 10.3 LB-FT |
| Starting Current | 8 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 11.0 | 29.0 | 42.0 | 55.0 | 63.0 | 70.0 | 73.0 | 67.0 | ||
| Efficiency | 0.0 | 60.0 | 71.0 | 75.0 | 77.0 | 76.0 | 74.0 | 76.5 | ||
| Speed (RPM) | 1,199 | 1,190 | 1,180 | 1,170 | 1,155 | 1,145 | 1,130 | 1,150 | ||
| Line Amps | 1.05 | 1.10 | 1.15 | 1.30 | 1.40 | 1.65 | 1.85 | 1.55 |
Parts
| 35FH4005A01SP | IEC FH NO GREASER W/PRIMED |
|---|---|
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| 35EP3700A01SP | FR ENDPLATE, XPFC |
| 35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
