Description
Specs
| Catalog Number | XL21342 |
|---|---|
| Enclosure | XPFC |
| Frame | 213 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 16.500 A @ 230.0 V 33.000 A @ 115.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 77.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 16.5 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3740L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 19.89 IN |
| Power Factor | 75 |
| Product Family | General Purpose |
| Pulley Face Code | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1735 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 37-0000-0389 |
|---|---|
| CAT.NO. | XL21342 |
| HP | 3 |
| VOLTS | 115/230 |
| AMPS | 34.4/17.2 |
| RPM | 1750 |
| HZ | 60 |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| FRAME | 213 |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.38356 Ohms A Ph / 2.2154 Ohms B Ph |
| Temp. Rise @ Rated Load | 61° C |
| Temp. Rise @ S.F. Load | 72° C |
| Start Configuration | DOL |
| Break-Down Torque | 33.1 LB-FT |
| Pull-Up Torque | 20 LB-FT |
| Locked-Rotor Torque | 31.8 LB-FT |
| Starting Current | 112.95 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 12.0 | 34.0 | 51.0 | 63.0 | 71.0 | 76.0 | 79.0 | 74.0 | ||
| Efficiency | 0.0 | 64.7 | 76.2 | 79.4 | 79.8 | 79.2 | 77.6 | 79.4 | ||
| Speed (RPM) | 1,799 | 1,788 | 1,776 | 1,763 | 1,749 | 1,732 | 1,713 | 1,739 | ||
| Line Amps | 10.50 | 11.10 | 12.50 | 14.60 | 17.10 | 20.20 | 23.70 | 19.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| 35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
| EC1850A06SP | ELEC CAP 115V 2.0 X 4.3 X |
