Description
Specs
Catalog Number | XL18162 |
---|---|
Enclosure | XPFC |
Frame | 184 |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Induction Run |
Output @ Frequency | 1.000 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
Voltage @ Frequency | 115.0 V @ 60 HZ 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
XP Class and Group | CLI GP D; CLII GP F,G |
XP Division | Division I |
Agency Approvals | UL CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 15.100 A @ 115.0 V 7.400 A @ 208.0 V 7.500 A @ 230.0 V |
Design Code | L |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 67.0 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 7.4 a |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
IP Rating | NONE |
KVA Code | K |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | No Locked Bearing |
Motor Lead Termination | Flying Leads |
Motor Type | 3634L |
Mounting Arrangement | F1 |
Number of Poles | 6 |
Overall Length | 16.92 IN |
Power Factor | 63 |
Product Family | General Purpose |
Pulley Face Code | Standard |
Rodent Screen | None |
Service Factor | 1.15 |
Shaft Diameter | 0.875 IN |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Speed | 1140 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Normally Closed Thermostat |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
XP Temp Code | T3C |
Drawings
Nameplate
SPEC. | 36-0000-0520 |
---|---|
CAT.NO. | XL18162 |
HP | 1 |
VOLTS | 115/208-230 |
AMPS | 15.1/7.4-7.5 |
RPM | 1140 |
HZ | 60 |
SER.F. | 1.15 |
RATING | 40C AMB-CONT |
FRAME | 184 |
USABLE AT 208V | N/A |
BLANK | NEMA MG-1 PART 5, IP54 |
Performance
No-Load Current | 0 A |
---|---|
Line-Line Res. @ 25° C | 0.417 Ohms A Ph / 1.84 Ohms B Ph |
Temp. Rise @ Rated Load | 69° C |
Temp. Rise @ S.F. Load | 77° C |
Break-Down Torque | 11 LB-FT |
Pull-Up Torque | 8.91 LB-FT |
Locked-Rotor Torque | 12.7 LB-FT |
Starting Current | 67.9 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 16.0 | 30.0 | 43.0 | 53.0 | 62.0 | 68.0 | 72.0 | 66.0 | ||
Efficiency | 0.0 | 47.4 | 62.8 | 69.5 | 72.6 | 73.6 | 73.3 | 73.2 | ||
Speed (RPM) | 1,198 | 1,192 | 1,185 | 1,177 | 1,169 | 1,160 | 1,149 | 1,164 | ||
Line Amps | 11.10 | 11.40 | 12.10 | 13.10 | 14.50 | 16.30 | 18.50 | 15.60 |
Parts
TAG-INSTAL-MAINT no wire (2100bx)4/22 | |
36FN3000A01SP | EXFN, PLASTIC, 7.00 OD, .912 ID |
35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
35CB3500A01SP | CONDUIT BOX LID, MACH |