Description
Specs
| Catalog Number | XL14142T |
|---|---|
| Enclosure | XPFC |
| Frame | 143T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 12.200 A @ 115.0 V 6.100 A @ 230.0 V 6.200 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 72.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 6.1 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3524L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.21 IN |
| Power Factor | 71 |
| Product Family | General Purpose |
| Pulley Face Code | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1750 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 35-0000-1163 |
|---|---|
| CAT.NO. | XL14142T |
| HP | 1 |
| VOLTS | 115/230 |
| AMPS | 12.2/6.1 |
| RPM | 1750 |
| HZ | 60 |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| FRAME | 143T |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.549 Ohms A Ph / 1.66 Ohms B Ph |
| Temp. Rise @ Rated Load | 63° C |
| Temp. Rise @ S.F. Load | 72° C |
| Break-Down Torque | 7.96 LB-FT |
| Pull-Up Torque | 6.57 LB-FT |
| Locked-Rotor Torque | 10.5 LB-FT |
| Starting Current | 73.5 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 17.0 | 37.0 | 53.0 | 65.0 | 73.0 | 79.0 | 82.0 | 77.0 | ||
| Efficiency | 0.0 | 53.0 | 67.4 | 73.0 | 75.1 | 75.3 | 74.4 | 75.2 | ||
| Speed (RPM) | 1,797 | 1,788 | 1,778 | 1,767 | 1,754 | 1,740 | 1,724 | 1,746 | ||
| Line Amps | 8.04 | 8.38 | 9.15 | 10.30 | 11.80 | 13.70 | 15.90 | 12.90 |
Parts
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
|---|---|
| 35EP3700A01SP | FR ENDPLATE, XPFC |
| 35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
