Description
Specs
Catalog Number | VXL051542A |
---|---|
Enclosure | XPFC |
Frame | 56C |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Induction Run |
Output @ Frequency | 1.500 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
XP Class and Group | CLI GP D; CLII GP F,G |
XP Division | Division I |
Agency Approvals | CSA UL |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | No Mounting |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 16.000 A @ 115.0 V 8.000 A @ 230.0 V |
Design Code | L |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 75.0 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 8.0 a |
Heater Indicator | No Heater |
Insulation Class | B |
Inverter Code | Not Inverter |
IP Rating | NONE |
KVA Code | J |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Termination | Flying Leads |
Motor Type | 3546L |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 17.40 IN |
Power Factor | 78 |
Product Family | General Purpose |
Pulley Face Code | C-Face |
Rodent Screen | None |
Service Factor | 1.00 |
Shaft Diameter | 0.625 IN |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Speed | 1725 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Normally Closed Thermostat |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 1 Location | EP |
Winding Thermal 2 | None |
XP Temp Code | T2C |
Drawings
Nameplate
SPEC | 35-0000-1102 |
---|---|
CAT.NO. | VXL051542A |
H.P. | 1.5 |
VOLTS | 115/230 |
AMPS | 16/8 |
R.P.M. | 1725 |
HZ | 60 |
SER.F. | 1.00 |
RATING | 40C AMB-CONT |
FRAME | 56C |
USABLE AT 208V | N/A |
BLANK | NEMA MG-1 PART 5, IP54 |
Performance
Temp. Rise @ Rated Load | 77° C |
---|---|
Start Configuration | DOL |
Break-Down Torque | 11 LB-FT |
Pull-Up Torque | 6.5 LB-FT |
Locked-Rotor Torque | 8.5 LB-FT |
Starting Current | 47 A |
Full Load Torque | 0 LB-FT |
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 1.42 Ohms A Ph / 1.4 Ohms B Ph |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 16.0 | 41.0 | 59.0 | 72.0 | 79.0 | 83.0 | 86.0 | 0.0 | |||||||||||
Efficiency | 0.0 | 61.7 | 73.9 | 77.8 | 78.6 | 77.9 | 75.9 | 0.0 | |||||||||||
Speed (RPM) | 1,798 | 1,786 | 1,774 | 1,761 | 1,746 | 1,729 | 1,708 | 0 | |||||||||||
Line Amps | 4.55 | 4.85 | 5.55 | 6.55 | 7.85 | 9.40 | 11.30 | 0.00 |
Parts
TAG-INSTAL-MAINT no wire (2100bx)4/22 | |
35FH4005A01SP | IEC FH NO GREASER W/PRIMED |
35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
35EP3702A01SP | PU EP-205 BRG-35X-56C-143-5TC |
35CB3001A01SP | EXPL CONDUIT BOX, MACH, 1/2" PIPE TAP LE |
35CB3500A01SP | CONDUIT BOX LID, MACH |
EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |