Description
Specs
| Catalog Number | VXL051522 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 1.500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 16.000 A @ 115.0 V 8.000 A @ 230.0 V 8.500 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 70.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 8.0 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| IP Rating | NONE |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3530L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 16.03 IN |
| Power Factor | 82 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 35-0000-1105 |
|---|---|
| CAT.NO. | VXL051522 |
| HP | 1.5 |
| VOLTS | 115/208-230 |
| AMPS | 16/8.5-8 |
| RPM | 3450 |
| HZ | 60 |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| FRAME | 56C |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 1.3569 Ohms A Ph / 1.2102 Ohms B Ph |
| Temp. Rise @ Rated Load | 72° C |
| Break-Down Torque | 6.56 LB-FT |
| Pull-Up Torque | 4.82 LB-FT |
| Locked-Rotor Torque | 7.25 LB-FT |
| Starting Current | 104 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 27.0 | 51.0 | 66.0 | 76.0 | 83.0 | 85.0 | 87.0 | 0.0 | ||
| Efficiency | 0.0 | 50.7 | 64.9 | 70.6 | 71.5 | 71.8 | 70.8 | 0.0 | ||
| Speed (RPM) | 3,596 | 3,572 | 3,551 | 3,527 | 3,478 | 3,472 | 3,437 | 0 | ||
| Line Amps | 8.68 | 9.61 | 11.50 | 13.90 | 16.38 | 20.20 | 23.70 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 35FH4005A01SP | IEC FH NO GREASER W/PRIMED |
| 34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
| 35EP3700A01SP | FR ENDPLATE, XPFC |
| 35EP3702A01SP | PU EP-205 BRG-35X-56C-143-5TC |
| 35CB3001A01SP | EXPL CONDUIT BOX, MACH, 1/2" PIPE TAP LE |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
