Description
Specs
Catalog Number | VJPFPM2538T-5 |
---|---|
Enclosure | OPSB |
Frame | 286JP |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 40.000 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
Voltage @ Frequency | 575.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | UL CSA EEV |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | No Mounting |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 36.000 A @ 575.0 V |
Design Code | B |
Drip Cover | Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 91.7 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 36.0 a |
Front Face Code | Drip Cover Mounting |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
KVA Code | G |
Lifting Lugs | Vertical Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 6 @ 10 AWG |
Motor Type | 3954M |
Mounting Arrangement | F1 |
Number of Poles | 2 |
Overall Length | 31.44 IN |
Power Factor | 91 |
Product Family | Fire Pump Motor |
Pulley End Bearing Type | Ball |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Tapped & Key |
Rodent Screen | Included |
Service Factor | 1.15 |
Shaft Diameter | 1.750 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | Shaft Slinger |
Speed | 3500 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Wye Start - Delta Run |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | VJPFPM2538T-5 |
---|---|
SPEC. | 39T043X991H2 |
HZ | 60 |
VOLTS | 575 |
AMPS | 36 |
EFF | 91.7 |
RATING | 40C AMB-CONT |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 0.371 Ohms A Ph / 0 Ohms B Ph |
Temp. Rise @ Rated Load | 64° C |
Temp. Rise @ S.F. Load | 81° C |
Start Configuration | DOL |
Break-Down Torque | 190 LB-FT |
Pull-Up Torque | 70.8 LB-FT |
Locked-Rotor Torque | 89.9 LB-FT |
Starting Current | 227 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 5.0 | 69.0 | 85.0 | 90.0 | 91.0 | 91.0 | 90.0 | 91.0 | ||
Efficiency | 0.0 | 93.0 | 94.0 | 93.3 | 92.0 | 90.1 | 88.3 | 90.9 | ||
Speed (RPM) | 3,599 | 3,580 | 3,557 | 3,532 | 3,503 | 3,470 | 3,435 | 3,483 | ||
Line Amps | 8.34 | 12.20 | 19.10 | 27.20 | 36.20 | 46.20 | 56.70 | 42.20 |
Parts
KOBX, CAST W/2.00 LEAD HOLE | |
10CB3500SP | CONDUIT BOX LID, CAST |
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |