Description
Specs
| Catalog Number | VHEM3314T |
|---|---|
| Enclosure | ODP |
| Frame | 215HP |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 15.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA EEV CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 16.900 A @ 460.0 V 33.800 A @ 230.0 V 35.400 A @ 208.0 V |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 90.2 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 16.9 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | K |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 14 AWG |
| Motor Type | 0744M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 23.73 IN |
| Power Factor | 91 |
| Product Family | Weather Proof |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | P-Base |
| Pulley Shaft Indicator | P-Base Groove & Key |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3500 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 07K218R867G1 |
|---|---|
| HP | 15 |
| VOLTS | 230/460 |
| AMP | 33.8/16.9 |
| RPM | 3500 |
| FRAME | 215HP |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 90.2 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6309 |
| ENCL | ODP |
Performance
| Temp. Rise @ Rated Load | 54° C |
|---|---|
| Temp. Rise @ S.F. Load | 68° C |
| Start Configuration | DOL |
| Break-Down Torque | 74.9 LB-FT |
| Pull-Up Torque | 55.4 LB-FT |
| Locked-Rotor Torque | 87.1 LB-FT |
| Starting Current | 166 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 60.0 | 80.0 | 88.0 | 91.0 | 92.0 | 93.0 | 92.0 | ||
| Efficiency | 0.0 | 89.0 | 92.0 | 92.3 | 91.6 | 90.5 | 89.2 | 90.9 | ||
| Speed (RPM) | 3,599 | 3,568 | 3,541 | 3,512 | 3,478 | 3,442 | 3,406 | 3,456 | ||
| Line Amps | 5.41 | 6.91 | 9.57 | 12.90 | 16.90 | 21.10 | 25.40 | 19.40 |
Parts
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
|---|---|
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
