Description
Specs
| Catalog Number | VHEM3312T |
|---|---|
| Enclosure | ODP |
| Frame | 213HP |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 10.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA EEV CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 11.200 A @ 460.0 V 22.400 A @ 230.0 V 24.200 A @ 208.0 V |
| Design Code | B |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 11.2 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | G |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 14 AWG |
| Motor Type | 0730M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 23.73 IN |
| Power Factor | 87 |
| Product Family | Weather Proof |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | P-Base |
| Pulley Shaft Indicator | P-Base Groove & Key |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3490 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 07K218Y361G1 |
|---|---|
| HP | 10 |
| VOLTS | 230/460 |
| AMP | 22.4/11.2 |
| RPM | 3490 |
| FRAME | 213HP |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 89.5 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6309 |
| ENCL | ODP |
Performance
| Temp. Rise @ S.F. Load | 75° C |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 50.8 LB-FT |
| Pull-Up Torque | 19.3 LB-FT |
| Locked-Rotor Torque | 26.8 LB-FT |
| Starting Current | 72.6 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 64.0 | 83.0 | 90.0 | 92.0 | 92.0 | 91.0 | 92.0 | ||
| Efficiency | 0.0 | 88.8 | 92.0 | 91.8 | 90.5 | 89.3 | 87.8 | 89.8 | ||
| Speed (RPM) | 3,599 | 3,575 | 3,550 | 3,524 | 3,493 | 3,458 | 3,418 | 3,472 | ||
| Line Amps | 3.34 | 4.15 | 6.08 | 8.55 | 11.20 | 14.30 | 17.60 | 13.10 |
Parts
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
|---|---|
| 09GS1013SP | GS FOR 09CB3501, 12CB1500 & 12CB1503 LID |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
