Description
Specs
| Catalog Number | VHEM2535T |
|---|---|
| Enclosure | OPEN |
| Frame | 286HP |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 30.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA EEV CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 36.000 A @ 460.0 V 72.000 A @ 230.0 V 78.000 A @ 208.0 V |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 94.1 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 36.0 a |
| Front Face Code | Drip Cover Mounting |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 10 AWG |
| Motor Type | 1072M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 29.93 IN |
| Power Factor | 82 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | P-Base |
| Pulley Shaft Indicator | P-Base Groove & Key |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1775 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | VHEM2535T |
|---|---|
| SPEC. | 10F886Z473G1 |
| HP | 30 |
| RPM | 1775 |
| VOLT | 230/460 |
| AMP | 72/36 |
| RATING | 40C AMB-CONT |
| NEMA-NOM-EFF | 94.1 |
Performance
| Pull-Up Torque | 134 LB-FT |
|---|---|
| Locked-Rotor Torque | 176 LB-FT |
| Starting Current | 263 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.0 | 44.0 | 65.0 | 77.0 | 82.0 | 85.0 | 86.0 | 84.0 | ||
| Efficiency | 0.0 | 90.1 | 93.6 | 94.5 | 94.5 | 94.2 | 93.6 | 94.3 | ||
| Speed (RPM) | 1,799 | 1,794 | 1,790 | 1,784 | 1,778 | 1,772 | 1,766 | 1,774 | ||
| Line Amps | 16.10 | 18.20 | 22.70 | 29.30 | 36.30 | 44.10 | 52.50 | 41.00 |
