Description
Specs
| Catalog Number | VHECP4106T |
|---|---|
| Enclosure | TEFC |
| Frame | 256HP |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 20.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA CSA EEV UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 51.000 A @ 208.0 V 46.000 A @ 230.0 V 23.000 A @ 460.0 V |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 92.4 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Modification | Severe Duty Features |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 23.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | K |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 12 AWG |
| Motor Type | 0944M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 26.11 IN |
| Power Factor | 89 |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | P-Base |
| Pulley Shaft Indicator | P-Base Groove & Key |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3540 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | VHECP4106T |
|---|---|
| SPEC. | 09G604Y613G1 |
| HP | 20 |
| VOLTS | 230/460 |
| AMP | 46/23 |
| RPM | 3540 |
| FRAME | 256HP |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 92.4 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6311 |
| ENCL | TEFC |
Performance
| Temp. Rise @ Rated Load | 60° C |
|---|---|
| Temp. Rise @ S.F. Load | 71° C |
| Start Configuration | DOL |
| Break-Down Torque | 147 LB-FT |
| Pull-Up Torque | 60.6 LB-FT |
| Locked-Rotor Torque | 76.3 LB-FT |
| Starting Current | 223 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 53.0 | 75.0 | 85.0 | 88.0 | 91.0 | 91.0 | 90.0 | ||
| Efficiency | 0.0 | 87.7 | 92.3 | 93.3 | 93.4 | 93.0 | 92.4 | 93.2 | ||
| Speed (RPM) | 3,599 | 3,585 | 3,572 | 3,558 | 3,544 | 3,529 | 3,512 | 3,535 | ||
| Line Amps | 8.26 | 9.98 | 13.50 | 17.80 | 22.70 | 27.70 | 33.30 | 25.70 |
Parts
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
|---|---|
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
