Description
Specs
Catalog Number | VFSWDM3554T-5E |
---|---|
Enclosure | TEFC |
Frame | 143TC |
Frame Material | Stainless Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 1.500 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 575.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | NEMA_PREMIUM UR NEMA PREMIUM CSA EEV |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | No Mounting |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 1.750 A @ 575.0 V |
Design Code | B |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 86.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 1.8 a |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | H |
Inverter Code | Inverter Ready |
KVA Code | L |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Finish | UNPAINTED |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
Motor Type | 3526M |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 14.03 IN |
Power Factor | 73 |
Product Family | WD All SD Non-Encapsulated |
Pulley End Bearing Type | Sealed Bearing |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
RoHS Status | ROHS COMPLIANT |
Service Factor | 1.15 |
Shaft Diameter | 0.875 IN |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1770 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | VFSWDM3554T-5E |
---|---|
SPEC. | 35E4709Z955G1 |
HP | 1.5 |
VOLTS | 575 |
AMP | 1.75 |
RPM | 1770 |
FRAME | 143TC |
SER.F. | 1.15 |
NEMA-NOM-EFF | 86.5 |
RATING | 40C AMB-CONT |
DE | 6205 |
ENCL | TEFC |
Performance
Temp. Rise @ Rated Load | 47° C |
---|---|
Temp. Rise @ S.F. Load | 55° C |
Start Configuration | DOL |
Break-Down Torque | 18.3 LB-FT |
Pull-Up Torque | 9.2 LB-FT |
Locked-Rotor Torque | 12.1 LB-FT |
Starting Current | 15.2 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 8.0 | 33.0 | 52.0 | 65.0 | 74.0 | 79.0 | 83.0 | 80.0 | ||
Efficiency | 0.0 | 76.4 | 84.4 | 86.6 | 86.8 | 86.2 | 84.9 | 85.5 | ||
Speed (RPM) | 1,799 | 1,792 | 1,785 | 1,777 | 1,768 | 1,760 | 1,750 | 1,759 | ||
Line Amps | 1.11 | 1.15 | 1.29 | 1.51 | 1.76 | 2.06 | 2.41 | 1.90 |
Parts
35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
---|---|
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |