Description
Specs
| Catalog Number | VFDFL3516TM |
|---|---|
| Enclosure | TEFC |
| Frame | 145TC |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 7.900 A @ 230.0 V 8.900 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 82.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 7.9 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 16 AWG, A PH |
| Motor Type | 3535LC |
| Mounting Arrangement | F2 |
| Number of Poles | 4 |
| Overall Length | 14.17 IN |
| Power Factor | 99 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1740 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | KO |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | VFDFL3516TM |
|---|---|
| SPEC. | 35E3081N499G1 |
| HP | 2 |
| VOLTS | 230 |
| AMP | 7.9 |
| RPM | 1740 |
| FRAME | 145TC |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 82.5 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| Line-Line Res. @ 25° C | 1.62 Ohms A Ph / 3.25 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 90° C |
| Temp. Rise @ S.F. Load | 93° C |
| Start Configuration | DOL |
| Break-Down Torque | 10.7 LB-FT |
| Pull-Up Torque | 10 LB-FT |
| Locked-Rotor Torque | 14.6 LB-FT |
| Starting Current | 52.8 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 83.0 | 98.0 | 100.0 | 100.0 | 99.0 | 98.0 | 96.0 | 0.0 | |||||||||||
| Efficiency | 0.0 | 66.0 | 80.6 | 83.2 | 82.8 | 79.4 | 73.0 | 0.0 | |||||||||||
| Speed (RPM) | 1,799 | 1,784 | 1,768 | 1,749 | 1,726 | 1,696 | 1,650 | 0 | |||||||||||
| Line Amps | 1.25 | 2.75 | 4.46 | 6.44 | 8.73 | 11.50 | 15.30 | 0.00 |
Parts
| EC1216C06SP | ELEC CAP, 216-259 MFD, 250V, 2.06D X 4. |
|---|---|
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| RM1014A01SP | BUTYL RUB.THRM COV. (MENA) |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
