Description
Specs
| Catalog Number | VEL11318A |
|---|---|
| Enclosure | OPEN |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CURUSEEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 4.200 A @ 230.0 V 8.400 A @ 115.0 V |
| Design Code | L |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 82.6 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.2 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Terminal Panel |
| Motor Lead Termination | None |
| Motor Lead Quantity/Wire Size | 7 @ 16 AWG |
| Motor Type | 3528LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 12.74 IN |
| Power Factor | 93 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1750 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | ES |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | VEL11318A |
|---|---|
| SPEC. | 35H993L247G1 |
| HP | 1 |
| VOLTS | 115/230 |
| AMP | 8.4/4.2 |
| RPM | 1750 |
| FRAME | 56C |
| SER.F. | 1.15 |
| F.L. AVG. EFF. | 82.6 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | OPEN |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 8.14 LB-FT |
| Pull-Up Torque | 6.67 LB-FT |
| Locked-Rotor Torque | 7.79 LB-FT |
| Starting Current | 35.5 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 2.5284 Ohms A Ph / 2.1561 Ohms B Ph |
| Temp. Rise @ Rated Load | 43° C |
| Temp. Rise @ S.F. Load | 51° C |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 39.0 | 74.0 | 86.0 | 91.0 | 93.0 | 94.0 | 94.0 | 94.0 | |||||||||||
| Efficiency | 0.0 | 64.5 | 78.1 | 82.0 | 83.3 | 82.5 | 80.4 | 82.8 | |||||||||||
| Speed (RPM) | 1,799 | 1,790 | 1,781 | 1,769 | 1,758 | 1,743 | 1,726 | 1,749 | |||||||||||
| Line Amps | 1.29 | 1.70 | 2.44 | 3.28 | 4.18 | 5.21 | 6.43 | 4.80 |
Parts
| 7YL OIL CAP 40MFD/370V | |
| EC1460A05SP | ELEC CAP, 460-552 MFD, 125V, 2.06D X 3. |
| 35CB4500SP | TERMINAL BOX LID STAMPED |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
