Description
Specs
Catalog Number | VEL11308 |
---|---|
Enclosure | ODTF |
Frame | 56C |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Cap Run |
Output @ Frequency | .750 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | CURUSEEV |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | No Mounting |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 3.200 A @ 230.0 V 6.300 A @ 115.0 V |
Design Code | L |
Drip Cover | Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 81.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 3.2 a |
Front Face Code | Drip Cover Mounting |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
IP Rating | NONE |
KVA Code | H |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
Motor Type | 3530LC |
Mounting Arrangement | F1 |
Number of Poles | 6 |
Overall Length | 14.12 IN |
Power Factor | 95 |
Product Family | General Purpose |
Pulley End Bearing Type | Ball |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
Service Factor | 1.00 |
Shaft Diameter | 0.625 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1160 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | VEL11308 |
---|---|
SPEC. | 35E019G064 |
HP | .75 |
VOLTS | 115/230 |
AMP | 6.3/3.2 |
RPM | 1160 |
FRAME | 56C |
SER.F. | 1.00 |
F.L. AVG. EFF. | 81.5 |
RATING | 40C AMB-CONT |
DE | 6205 |
ENCL | ODTF |
Performance
No-Load Current | 0 A |
---|---|
Line-Line Res. @ 25° C | 1.4 Ohms A Ph / 1.84 Ohms B Ph |
Temp. Rise @ Rated Load | 39° C |
Start Configuration | DOL |
Break-Down Torque | 8.03 LB-FT |
Pull-Up Torque | 5.18 LB-FT |
Locked-Rotor Torque | 11.2 LB-FT |
Starting Current | 44.2 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 60.0 | 84.0 | 91.0 | 94.0 | 95.0 | 95.0 | 93.0 | 0.0 | ||
Efficiency | 0.0 | 54.8 | 72.8 | 79.9 | 81.6 | 79.7 | 73.7 | 0.0 | ||
Speed (RPM) | 1,198 | 1,190 | 1,182 | 1,172 | 1,160 | 1,143 | 1,115 | 0 | ||
Line Amps | 1.97 | 2.66 | 3.66 | 4.84 | 6.28 | 8.03 | 10.60 | 0.00 |
Parts
OC3050F09SP | CAPACITOR 50 MFD 370 VAC |
---|---|
35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
35FH4006A01SP | DRIP COVER,STAMPED,W/ PRIMER |
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |