Description
Specs
| Catalog Number | VEL11305 |
|---|---|
| Enclosure | ODTF |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CURUSEEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 2.200 A @ 230.0 V 4.400 A @ 115.0 V |
| Design Code | N |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 76.2 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 2.2 a |
| Front Face Code | Drip Cover Mounting |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3526LC |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 12.12 IN |
| Power Factor | 94 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1140 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | VEL11305 |
|---|---|
| SPEC. | 35E019N651G1 |
| HP | .5 |
| VOLTS | 115/230 |
| AMP | 4.4/2.2 |
| RPM | 1140 |
| FRAME | 56C |
| SER.F. | 1.25 |
| F.L. AVG. EFF. | 76.2 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | ODTF |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 4.45 LB-FT |
| Pull-Up Torque | 3.82 LB-FT |
| Locked-Rotor Torque | 8.13 LB-FT |
| Starting Current | 31.4 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 69.0 | 84.0 | 91.0 | 94.0 | 94.0 | 94.0 | 92.0 | 94.0 | ||
| Efficiency | 0.0 | 51.5 | 69.8 | 76.2 | 78.8 | 77.2 | 72.7 | 77.2 | ||
| Speed (RPM) | 1,199 | 1,191 | 1,182 | 1,172 | 1,159 | 1,144 | 1,117 | 1,144 | ||
| Line Amps | 1.33 | 1.86 | 2.54 | 3.41 | 4.38 | 5.56 | 7.24 | 5.56 |
Parts
| 7YL OIL CAP 40MFD/370V | |
| EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| 35FH4006A01SP | DRIP COVER,STAMPED,W/ PRIMER |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
