Description
Specs
Catalog Number | VEJMM3154T-5 |
---|---|
Enclosure | ODTF |
Frame | 145JM |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 1.500 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 575.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | CSA CSA EEV UR |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | No Mounting |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 1.600 A @ 575.0 V |
Design Code | B |
Drip Cover | Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 86.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 1.6 a |
Front Face Code | Drip Cover Mounting |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Inverter Ready |
KVA Code | K |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
Motor Type | 3530M |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 16.31 IN |
Power Factor | 82 |
Product Family | General Purpose |
Pulley End Bearing Type | Ball |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Tapped & Key |
Rodent Screen | Included |
Service Factor | 1.15 |
Shaft Diameter | 0.875 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | Shaft Slinger |
Speed | 1740 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | VEJMM3154T-5 |
---|---|
SPEC. | 35E422R675E7 |
HP | 1.5 |
VOLTS | 575 |
AMP | 1.6 |
RPM | 1740 |
FRAME | 145JM |
SER.F. | 1.15 |
NEMA-NOM-EFF | 86.5 |
RATING | 40C AMB-CONT |
CC | 010A |
DE | 6206 |
ENCL | ODTF |
Performance
No-Load Current | 0 A |
---|---|
Line-Line Res. @ 25° C | 15.8 Ohms A Ph / 0 Ohms B Ph |
Temp. Rise @ Rated Load | 35° C |
Temp. Rise @ S.F. Load | 43° C |
Start Configuration | DOL |
Break-Down Torque | 16.5 LB-FT |
Pull-Up Torque | 11.6 LB-FT |
Locked-Rotor Torque | 12.8 LB-FT |
Starting Current | 12.5 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 8.0 | 44.0 | 65.0 | 76.0 | 82.0 | 85.0 | 86.0 | 84.0 | ||
Efficiency | 0.0 | 81.0 | 86.6 | 87.4 | 86.7 | 85.3 | 83.2 | 85.9 | ||
Speed (RPM) | 1,799 | 1,784 | 1,770 | 1,754 | 1,738 | 1,719 | 1,697 | 1,727 | ||
Line Amps | 0.70 | 0.80 | 1.00 | 1.30 | 1.60 | 1.90 | 2.40 | 1.80 |
Parts
35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
---|---|
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |