Description
Specs
| Catalog Number | VBL3510T |
|---|---|
| Enclosure | TEFC |
| Frame | 143TC |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Brake Torque | 6.0 lb-ft |
| Current @ Voltage | 4.650 A @ 230.0 V 9.250 A @ 115.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 80.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.7 a |
| Front Face Code | Brake Mounting |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3526LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 17.86 IN |
| Power Factor | 85 |
| Product Family | General Purpose |
| Product Type | BRAKE MOTOR |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.25 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1740 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | VBL3510T |
|---|---|
| SPEC. | 35E692G241 |
| HP | 1 |
| VOLTS | 115/230 |
| AMP | 9.25/4.65 |
| RPM | 1740 |
| FRAME | 143TC |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 80 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| Line-Line Res. @ 25° C | 2.835 Ohms A Ph / 1.4934 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 54° C |
| Temp. Rise @ S.F. Load | 76° C |
| Start Configuration | DOL |
| Break-Down Torque | 7.77 LB-FT |
| Pull-Up Torque | 6.11 LB-FT |
| Locked-Rotor Torque | 9.4 LB-FT |
| Starting Current | 36.9 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 20.0 | 50.0 | 68.0 | 79.0 | 85.0 | 89.0 | 91.0 | 89.0 | ||
| Efficiency | 0.0 | 63.4 | 75.5 | 78.5 | 78.4 | 76.2 | 72.2 | 76.2 | ||
| Speed (RPM) | 1,799 | 1,784 | 1,771 | 1,755 | 1,738 | 1,716 | 1,686 | 1,716 | ||
| Line Amps | 2.41 | 2.62 | 3.14 | 3.89 | 4.83 | 5.98 | 7.41 | 5.98 |
Parts
| GASKET-CONDUIT BOX, .06 THICK #SV-330 LE | |
| HA1014A02SP | SPL SPACER FOR FAN COVER MTD ON BRAKE |
| 35FN3002A01SP | EXFN, PLASTIC, 6.376 OD, .625 ID W/FLAT |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
