Description
Specs
| Catalog Number | UCME153 |
|---|---|
| Enclosure | TEAO |
| Frame | 145TYZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 1.500 HP @ 60 HZ 3.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ 208.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 8.500 A @ 208.0 V 8.200 A @ 230.0 V 4.100 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 80.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.1 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Pipe Or Pipe Adaptor |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3524M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 13.37 IN |
| Power Factor | 83 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Tapped & Key |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | UCME153 |
|---|---|
| SPEC. | 35E2501S057G1 |
| HP | 1.5-3 |
| VOLTS | 208-230/460 |
| AMP | 8.5-8.2/4.1 |
| RPM | 3450 |
| FRAME | 145TYZ |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 80 |
| RATING | 40C AMB-CONT |
| DE | 6206 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 4.81 Ohms A Ph / 0 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 19 LB-FT |
| Pull-Up Torque | 10 LB-FT |
| Locked-Rotor Torque | 17 LB-FT |
| Starting Current | 35 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 16.0 | 46.0 | 66.0 | 77.0 | 83.0 | 86.0 | 89.0 | 0.0 | ||
| Efficiency | 0.0 | 66.6 | 78.6 | 83.0 | 83.8 | 83.5 | 83.0 | 0.0 | ||
| Speed (RPM) | 3,593 | 3,567 | 3,541 | 3,512 | 3,481 | 3,449 | 3,415 | 0 | ||
| Line Amps | 2.10 | 2.30 | 2.70 | 3.40 | 4.10 | 4.80 | 5.70 | 0.00 |
Parts
| HA6021A01SP | ADAPTOR, MACH |
|---|---|
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
