Description
Specs
| Catalog Number | UCL3145 |
|---|---|
| Enclosure | OLC |
| Frame | 145TZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 4.500 HP @ 60 HZ 3.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 14.300 A @ 230.0 V 21.500 A @ 208.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 77.8 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 14.3 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Pipe Or Pipe Adaptor |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 12 AWG, A PH |
| Motor Type | 3540LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 15.63 IN |
| Power Factor | 91 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Tapped & Key |
| Rodent Screen | Included |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | UCL3145 |
|---|---|
| SPEC. | 35T926T819 |
| HP | 3-4.5 AIR OVER |
| VOLTS | 230 |
| AMP | 14.3-20 |
| RPM | 3450 |
| FRAME | 145TZ |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 77.8 |
| RATING | 40C AMB-CONT |
| DE | 6206 |
| ENCL | OLC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.462 Ohms A Ph / 2.24 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 17 LB-FT |
| Pull-Up Torque | 10.5 LB-FT |
| Locked-Rotor Torque | 13 LB-FT |
| Starting Current | 136 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 38.0 | 70.0 | 83.0 | 89.0 | 92.0 | 93.0 | 93.0 | 0.0 | ||
| Efficiency | 0.0 | 57.4 | 71.5 | 76.8 | 78.5 | 78.4 | 77.1 | 0.0 | ||
| Speed (RPM) | 3,592 | 3,569 | 3,544 | 3,516 | 3,486 | 3,451 | 3,409 | 0 | ||
| Line Amps | 7.10 | 9.20 | 12.30 | 16.00 | 20.30 | 25.00 | 30.40 | 0.00 |
Parts
| OC3030F11SP | CAPACITOR 30 MFD 370 VAC |
|---|---|
| HA6021A01SP | ADAPTOR, MACH |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X |
