Description
Specs
| Catalog Number | UCC10150 |
|---|---|
| Enclosure | OPEN |
| Frame | 215Z |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Oil Capacitor Start and Run |
| Output @ Frequency | 15.000 HP @ 60 HZ 10.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 41.000 A @ 230.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 83.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 41.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | C |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Pipe Or Pipe Adaptor |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 8 AWG, A PH |
| Motor Type | 3740C |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 18.57 IN |
| Power Factor | 98 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Tapped & Key |
| Rodent Screen | Included |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | UCC10150 |
|---|---|
| SPEC. | 37E764W977 |
| HP | 10-15 AIR OVER |
| VOLTS | 230 |
| AMP | 41-57 |
| RPM | 3450 |
| FRAME | 215Z |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 83 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | OPEN |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.196 Ohms A Ph / 0.344 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 46 LB-FT |
| Pull-Up Torque | 5.3 LB-FT |
| Locked-Rotor Torque | 6.5 LB-FT |
| Starting Current | 245 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 39.0 | 78.0 | 92.0 | 98.0 | 99.0 | 99.0 | 99.0 | 0.0 | ||
| Efficiency | 0.0 | 68.7 | 81.5 | 85.1 | 85.2 | 83.2 | 79.1 | 0.0 | ||
| Speed (RPM) | 3,594 | 3,565 | 3,533 | 3,496 | 3,453 | 3,400 | 3,324 | 0 | ||
| Line Amps | 16.30 | 22.70 | 32.40 | 43.90 | 57.40 | 73.10 | 93.20 | 0.00 |
