Description
Specs
| Catalog Number | PSC3524A |
|---|---|
| Enclosure | TEAO |
| Frame | 48Z |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Oil Capacitor Start and Run |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.000 A @ 230.0 V 6.000 A @ 115.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 65.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.0 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | - |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 7 @ 18 AWG |
| Motor Type | 3418C |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 11.96 IN |
| Power Factor | 81 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.500 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1625 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | PSC3524A |
|---|---|
| SPEC. | 34G144W538 |
| HP | .5 AIR OVER |
| VOLTS | 115/230 |
| AMP | 6/3 |
| RPM | 1625 |
| FRAME | 48Z |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 65 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Line-Line Res. @ 25° C | 6.28 Ohms A Ph / 16 Ohms B Ph |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 2.4 LB-FT |
| Pull-Up Torque | 0.6 LB-FT |
| Locked-Rotor Torque | 0.8 LB-FT |
| Starting Current | 1.5 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 39.0 | 58.0 | 72.0 | 81.0 | 87.0 | 90.0 | 0.0 | 0.0 | ||
| Efficiency | 0.0 | 44.3 | 60.9 | 67.2 | 67.9 | 63.3 | 0.0 | 0.0 | ||
| Speed (RPM) | 1,790 | 1,758 | 1,720 | 1,675 | 1,615 | 1,521 | 0 | 0 | ||
| Line Amps | 1.40 | 1.60 | 1.85 | 2.25 | 2.75 | 3.55 | 0.00 | 0.00 |
Parts
| FR ENDPLATE, MACH | |
| 34EP3102A02SP | FR/PU ENDPLATE, MACH |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| OC3012F12SP | CYL OIL CAP 12MFD/370V |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
