Description
Specs
| Catalog Number | PCL3513M |
|---|---|
| Enclosure | TEFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 1.500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 13.200 A @ 115.0 V 6.600 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 75.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 6.6 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | F |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 4 @ 16 AWG, A&J |
| Motor Type | 3520LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 13.23 IN |
| Power Factor | 98 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Do Not Use |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | KO |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | PCL3513M |
|---|---|
| SPEC. | 35T982Y862 |
| HP | 1.5 |
| VOLTS | 115/230 |
| AMP | 13.2/6.6 |
| RPM | 3450 |
| FRAME | 56C |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 75.5 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 2.38 Ohms A Ph / 1.84 Ohms B Ph |
| Temp. Rise @ Rated Load | 40° C |
| Temp. Rise @ S.F. Load | 47° C |
| Start Configuration | DOL |
| Break-Down Torque | 4.63 LB-FT |
| Pull-Up Torque | 3.25 LB-FT |
| Locked-Rotor Torque | 4.25 LB-FT |
| Starting Current | 34.7 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 81.0 | 87.0 | 90.0 | 96.0 | 98.0 | 97.0 | 96.0 | 98.0 | ||
| Efficiency | 0.0 | 51.0 | 71.0 | 74.5 | 75.5 | 74.0 | 70.0 | 75.0 | ||
| Speed (RPM) | 3,585 | 3,575 | 3,550 | 3,515 | 3,490 | 3,440 | 3,370 | 3,470 | ||
| Line Amps | 1.50 | 2.70 | 3.60 | 5.00 | 6.60 | 8.40 | 10.50 | 7.40 |
Parts
| OC3060C09SP | CAPACITOR 60 MFD 240 VAC |
|---|---|
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
