Description
Specs
| Catalog Number | M44010TX-50 |
|---|---|
| Enclosure | TEFC |
| Frame | 444T |
| Frame Material | Iron |
| Frequency | 50.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 125.000 HP @ 50 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 380.0 V @ 50 HZ 460.0 V @ 50 HZ |
| XP Class and Group | None |
| XP Division | Division II |
| Agency Approvals | CCSA US |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Current @ Voltage | 144.000 A @ 460.0 V 172.000 A @ 380.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 94.2 % |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 144.0 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Motor Lead Quantity/Wire Size | 12 @ 1/0 AWG |
| Motor Type | A44088M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 44.97 IN |
| Power Factor | 86 |
| Product Family | General Industrial |
| Pulley End Bearing Type | Ball |
| Service Factor | 1.15 |
| Shaft Diameter | 3.375 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1485 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Winding | None |
| XP Temp Code | T3 |
Drawings
Nameplate
| KHZ | 2 |
|---|---|
| TCODE | T3 |
| CL II DIV 2 GR | X X X |
| CAT.NO. | M44010TX-50 |
| HP | 125 |
| RPM | 1485 |
| VOLTS | 380/460 |
| AMPS | 172/144 |
| DRIVE END BEARING | 90BC03J30X |
| OPP D.E. BEARING | 90BC03J30X |
Performance
| Rated Load |
|---|
Parts
| 412118006A | DRAIN |
|---|---|
| 034017014AB | LCKW 3/8 STD. PLATED |
| 412118006A | DRAIN |
