Description
Specs
| Catalog Number | M23033TX-50 |
|---|---|
| Enclosure | TEFC |
| Frame | 254T |
| Frame Material | Iron |
| Frequency | 50.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 15.000 HP @ 50 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 380.0 V @ 50 HZ 460.0 V @ 50 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 25 |
| Current @ Voltage | 20.000 A @ 460.0 V 22.000 A @ 380.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.8 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 20.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 2200 rpm |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 12 @ 12 AWG |
| Motor Type | 0940M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 23.28 IN |
| Power Factor | 80 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1465 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T2B |
Drawings
Nameplate
| CAT NO | M23033TX-50 |
|---|---|
| SPEC. | 09M322T333H3 |
| FRAME | 254T |
| VOLTS | 380/460 |
| MAG CUR | 9.5/9.9 |
| RPM | 1465 |
| HZ | 50 |
| SER.F. | 1.00 |
| NOM.EFF. | 89.8 |
| RATING | 40C AMB-CONT-S1 |
| DE BRG | 6309 |
| INV.TYPE | PWM |
| CT HZ FROM | 25 |
| CAT.NO. | M23033TX-50 |
| AMB | 40C |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.72415 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 82° C |
| Temp. Rise @ S.F. Load | 99° C |
| Start Configuration | DOL |
| Break-Down Torque | 196 LB-FT |
| Pull-Up Torque | 87.4 LB-FT |
| Locked-Rotor Torque | 114 LB-FT |
| Starting Current | 138 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 39.0 | 61.0 | 74.0 | 80.0 | 84.0 | 85.0 | 82.0 | |||||||||||
| Efficiency | 0.0 | 83.8 | 89.4 | 90.5 | 90.3 | 89.5 | 88.4 | 89.8 | |||||||||||
| Speed (RPM) | 1,499 | 1,492 | 1,484 | 1,476 | 1,466 | 1,457 | 1,446 | 1,461 | |||||||||||
| Line Amps | 9.94 | 10.70 | 12.80 | 15.90 | 19.50 | 23.50 | 27.80 | 21.90 |
Parts
| EXTERNAL FAN, PLASTIC (COMES W/SCREW FRO | |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 09EP1101A11SP | PU ENDPLATE, MACH |
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
| 09GS1013SP | GS FOR 09CB3501, 12CB1500 & 12CB1503 LID |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
