Description
Specs
| Catalog Number | M1712T |
|---|---|
| Enclosure | TEFC |
| Frame | 284T |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 10.000 HP @ 60 HZ 20.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 25.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 18.5 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 10 AWG |
| Motor Type | 1046M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 8 |
| Overall Length | 27.76 IN |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1760 rpm 870 rpm |
| Speed Code | 2S-1W-CT |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | M1712T |
|---|---|
| SPEC. | 10C151Y731 |
| HP | 20/10 |
| VOLTS | 460 |
| AMP | 25/18.5 |
| RPM | 1760/870 |
| FRAME | 284T |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| DE | 6311 |
| ENCL | TEFC |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 178 LB-FT |
| Pull-Up Torque | 100 LB-FT |
| Locked-Rotor Torque | 132 LB-FT |
| Starting Current | 92.2 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.816 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 55° C |
| Temp. Rise @ S.F. Load | 63° C |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 25.0 | 40.0 | 51.0 | 59.0 | 64.0 | 68.0 | 62.0 | |||||||||||
| Efficiency | 0.0 | 72.9 | 81.9 | 85.2 | 86.7 | 86.4 | 85.6 | 86.5 | |||||||||||
| Speed (RPM) | 899 | 895 | 891 | 887 | 882 | 877 | 872 | 879 | |||||||||||
| Line Amps | 12.80 | 13.30 | 14.50 | 16.30 | 18.40 | 21.10 | 24.20 | 20.00 |
