Description
Specs
| Catalog Number | M1211T |
|---|---|
| Enclosure | OPSB |
| Frame | 254T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 15.000 HP @ 60 HZ 3.800 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 20.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 8.7 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 12 AWG |
| Motor Type | 3936M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 8 |
| Overall Length | 21.69 IN |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1770 rpm 880 rpm |
| Speed Code | 2S-1W-VT |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | M1211T |
|---|---|
| SPEC. | 39D101X560G1 |
| HP | 15/3.8 |
| VOLTS | 460 |
| AMP | 20/8.7 |
| RPM | 1770/880 |
| FRAME | 254T |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| DE | 6309 |
| ENCL | OPSB |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 152 LB-FT |
| Pull-Up Torque | 58.2 LB-FT |
| Locked-Rotor Torque | 83.3 LB-FT |
| Starting Current | 128 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 40.0 | 61.0 | 72.0 | 79.0 | 82.0 | 83.0 | 81.0 | ||
| Efficiency | 0.0 | 80.2 | 87.8 | 90.3 | 89.8 | 90.2 | 89.0 | 90.0 | ||
| Speed (RPM) | 1,799 | 1,791 | 1,785 | 1,778 | 1,771 | 1,763 | 1,754 | 1,766 | ||
| Line Amps | 9.97 | 11.00 | 13.20 | 16.20 | 20.00 | 23.60 | 28.10 | 22.20 |
Parts
| 39EP3200A01SP | FR/PU ENDPLATE, MACH |
|---|---|
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
