Description
Specs
| Catalog Number | M1210T |
|---|---|
| Enclosure | OPEN |
| Frame | 215T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 10.000 HP @ 60 HZ 2.500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 13.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 5.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 14 AWG |
| Motor Type | 3744M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 8 |
| Overall Length | 17.45 IN |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.375 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1725 rpm 850 rpm |
| Speed Code | 2S-1W-VT |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | M1210T |
|---|---|
| SPEC. | 37B01Y58 |
| HP | 10/2.5 |
| VOLTS | 460 |
| AMP | 13/5 |
| RPM | 1725/850 |
| FRAME | 215T |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | OPEN |
Performance
| Temp. Rise @ Rated Load | 51° C |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 43 LB-FT |
| Pull-Up Torque | 21 LB-FT |
| Locked-Rotor Torque | 23 LB-FT |
| Starting Current | 18.5 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 5.89 Ohms A Ph / 0 Ohms B Ph |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 11.0 | 29.0 | 45.0 | 57.0 | 66.0 | 71.0 | 75.0 | 0.0 | |||||||||||
| Efficiency | 0.0 | 61.7 | 74.0 | 78.2 | 79.5 | 79.2 | 78.0 | 0.0 | |||||||||||
| Speed (RPM) | 898 | 890 | 882 | 873 | 863 | 852 | 839 | 0 | |||||||||||
| Line Amps | 3.20 | 3.30 | 3.60 | 4.00 | 4.50 | 5.20 | 6.00 | 0.00 |
Parts
| .25-20 X .75, TAPTITE II, HEX WSHR SLTD | |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
