Description
Specs
| Catalog Number | L3705 |
|---|---|
| Enclosure | TEFC |
| Frame | 215 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 115.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 15.000 A @ 208.0 V 30.000 A @ 115.0 V 14.000 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 80.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 14.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 8 @ 14 AWG |
| Motor Type | 3735LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 17.51 IN |
| Power Factor | 90 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L3705 |
|---|---|
| SPEC. | 37C11X229 |
| HP | 3 |
| VOLTS | 115/230 |
| AMP | 30/14 |
| RPM | 1725 |
| FRAME | 215 |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 80 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.581 Ohms A Ph / 2.08 Ohms B Ph |
| Temp. Rise @ Rated Load | 56° C |
| Temp. Rise @ S.F. Load | 74° C |
| Start Configuration | DOL |
| Break-Down Torque | 24 LB-FT |
| Pull-Up Torque | 20 LB-FT |
| Locked-Rotor Torque | 45 LB-FT |
| Starting Current | 110 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 31.0 | 64.0 | 80.0 | 86.0 | 90.0 | 91.0 | 92.0 | 91.0 | ||
| Efficiency | 0.0 | 61.3 | 74.6 | 79.2 | 80.7 | 80.4 | 79.0 | 80.5 | ||
| Speed (RPM) | 1,796 | 1,784 | 1,771 | 1,756 | 1,740 | 1,722 | 1,701 | 1,729 | ||
| Line Amps | 5.00 | 6.20 | 8.20 | 10.70 | 13.50 | 16.60 | 20.20 | 15.40 |
Parts
| EC1850A06SP | ELEC CAP 115V 2.0 X 4.3 X |
|---|---|
| 37GS1000SP | GASKET, CONDUIT BOX STD., .06 THICK LEXI |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 37CB3802SP | CAPACITOR COVER, CAST |
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
