Description
Specs
| Catalog Number | L3703 |
|---|---|
| Enclosure | TEFC |
| Frame | 213 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 115.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 11.200 A @ 208.0 V 23.000 A @ 115.0 V 10.500 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 74.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 10.5 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 8 @ 14 AWG |
| Motor Type | 3728LC |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 17.51 IN |
| Power Factor | 87 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1165 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L3703 |
|---|---|
| SPEC. | 37C11W005 |
| HP | 2 |
| VOLTS | 115/230 |
| AMP | 23/10.5 |
| RPM | 1165 |
| FRAME | 213 |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 74 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | TEFC |
Performance
| Line-Line Res. @ 25° C | 0.327 Ohms A Ph / 0.653 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 53° C |
| Start Configuration | DOL |
| Break-Down Torque | 17.5 LB-FT |
| Pull-Up Torque | 14 LB-FT |
| Locked-Rotor Torque | 27.3 LB-FT |
| Starting Current | 108 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 12.0 | 33.0 | 51.0 | 63.0 | 71.0 | 75.0 | 77.0 | 0.0 | ||
| Efficiency | 0.0 | 63.8 | 75.8 | 79.5 | 80.0 | 78.8 | 75.9 | 0.0 | ||
| Speed (RPM) | 1,199 | 1,192 | 1,185 | 1,176 | 1,167 | 1,155 | 1,139 | 0 | ||
| Line Amps | 14.60 | 15.30 | 16.90 | 19.50 | 22.90 | 27.30 | 33.10 | 0.00 |
Parts
| CAPACITORS 20 MFD 370 VAC | |
| 37GS1000SP | GASKET, CONDUIT BOX STD., .06 THICK LEXI |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 37CB3802SP | CAPACITOR COVER, CAST |
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
