Description
Specs
| Catalog Number | L3605T-50 |
|---|---|
| Enclosure | TEFC |
| Frame | 182T |
| Frame Material | Steel |
| Frequency | 50.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 2.000 HP @ 50 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 110.0 V @ 50 HZ 220.0 V @ 50 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CE CSA UR WEEE |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 20.000 A @ 110.0 V 10.000 A @ 220.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 81.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 10.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 4 @ 14 AWG, A PH |
| Motor Type | 3634LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 16.56 IN |
| Power Factor | 85 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1425 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L3605T-50 |
|---|---|
| SPEC. | 36E04X353 |
| HP | 2/1.5KW IEC60034-30 |
| VOLTS | 110/220 |
| AMP | 20/10 |
| RPM | 1425 1/MIN IC411 35KG |
| FRAME | 182T |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 81 |
| RATING | 40C AMB-CONT |
| DE | 6206 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.05 Ohms A Ph / 1.48 Ohms B Ph |
| Temp. Rise @ Rated Load | 67° C |
| Temp. Rise @ S.F. Load | 87° C |
| Start Configuration | DOL |
| Break-Down Torque | 17 LB-FT |
| Pull-Up Torque | 15 LB-FT |
| Locked-Rotor Torque | 17 LB-FT |
| Starting Current | 57.5 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 17.0 | 57.0 | 75.0 | 82.0 | 85.0 | 87.0 | 86.0 | 86.0 | ||
| Efficiency | 0.0 | 75.0 | 83.0 | 83.0 | 81.0 | 77.0 | 70.0 | 78.6 | ||
| Speed (RPM) | 1,532 | 1,520 | 1,504 | 1,486 | 1,463 | 1,439 | 1,401 | 1,449 | ||
| Line Amps | 3.50 | 4.20 | 5.80 | 7.90 | 10.30 | 12.80 | 16.40 | 11.80 |
Parts
| OC3040F18SP | 7YL OIL CAP 40MFD/370V |
|---|---|
| EC1645A06SP | ELEC CAP, 645-774 MFD, 125V, 2.06D X 4. |
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| 36EP3100A01SP | PUEP ASSEMBLY FOR ROUTING PURPOSES |
| 36CB3800SP | CAPACITOR COVER, CAST |
| 36FN3000A01SP | EXFN, PLASTIC, 7.00 OD, .912 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
