Description
Specs
| Catalog Number | L3516TM |
|---|---|
| Enclosure | TEFC |
| Frame | 56HZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 8.000 A @ 230.0 V 8.700 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 82.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 8.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 16 AWG, A PH |
| Motor Type | 3528LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 13.30 IN |
| Power Factor | 97 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1740 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Do Not Use |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | KO |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L3516TM |
|---|---|
| SPEC. | 35J674P239 |
| HP | 2 |
| VOLTS | 208-230 |
| AMP | 8.7-8 |
| RPM | 1740 |
| FRAME | 56HZ |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 82.5 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 1.52 Ohms A Ph / 3.23 Ohms B Ph |
| Temp. Rise @ Rated Load | 72° C |
| Temp. Rise @ S.F. Load | 91° C |
| Start Configuration | DOL |
| Break-Down Torque | 11.88 LB-FT |
| Pull-Up Torque | 10.11 LB-FT |
| Locked-Rotor Torque | 12.72 LB-FT |
| Starting Current | 49.48 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 53.0 | 84.0 | 94.0 | 97.0 | 98.0 | 97.0 | 97.0 | 98.0 | ||
| Efficiency | 0.0 | 63.8 | 78.8 | 83.0 | 83.3 | 80.4 | 75.5 | 81.9 | ||
| Speed (RPM) | 1,799 | 1,786 | 1,770 | 1,752 | 1,731 | 1,704 | 1,668 | 1,731 | ||
| Line Amps | 2.13 | 3.22 | 4.69 | 6.58 | 8.71 | 11.38 | 14.57 | 9.32 |
Parts
| CAPACITOR 30 MFD 370 VAC | |
| EC1189C06SP | ELEC CAP, 189-227 MFD, 250V, 2.06D X 4. |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
