Description
Specs
| Catalog Number | L3515M |
|---|---|
| Enclosure | TEFC |
| Frame | 56/56H |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 11.500 A @ 230.0 V 23.000 A @ 115.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 74.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 11.5 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 4 @ 14 AWG, A&J |
| Motor Type | 3535L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 13.79 IN |
| Power Factor | 82 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Do Not Use |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L3515M |
|---|---|
| SPEC. | 35J383-2013 |
| HP | 2 |
| VOLTS | 115/230 |
| AMP | 23/11.5 |
| RPM | 3450 |
| FRAME | 56/56H |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 74 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 9.5 LB-FT |
| Pull-Up Torque | 6 LB-FT |
| Locked-Rotor Torque | 7.5 LB-FT |
| Starting Current | 78 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 24.0 | 49.0 | 65.0 | 74.0 | 80.0 | 83.0 | 85.0 | 0.0 | ||
| Efficiency | 0.0 | 50.8 | 63.7 | 67.8 | 70.1 | 71.1 | 69.9 | 0.0 | ||
| Speed (RPM) | 3,590 | 3,570 | 3,550 | 3,530 | 3,505 | 3,478 | 3,450 | 0 | ||
| Line Amps | 6.50 | 7.00 | 8.00 | 9.70 | 11.60 | 13.70 | 16.20 | 0.00 |
Parts
| ELEC CAP, 645-774 MFD, 125V, 2.06D X 4. | |
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
| 34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
