Description
Specs
| Catalog Number | L3356 |
|---|---|
| Enclosure | TEFC |
| Frame | 42 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .250 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 2.000 A @ 230.0 V 2.400 A @ 208.0 V 4.000 A @ 115.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 57.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| Feedback Signal | NONE |
| High Voltage Full Load Amps | 2.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3316L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 9.56 IN |
| Power Factor | 64 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.35 |
| Shaft Diameter | 0.375 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L3356 |
|---|---|
| SPEC. | 33-850-389 |
| HP | .25 |
| VOLTS | 115/230 |
| AMP | 4/2 |
| RPM | 3450 |
| FRAME | 42 |
| SER.F. | 1.35 |
| NEMA-NOM-EFF | 57 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEFC |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 7.72 Ohms A Ph / 5.3 Ohms B Ph |
| Temp. Rise @ Rated Load | 42° C |
| Temp. Rise @ S.F. Load | 57° C |
| Start Configuration | DOL |
| Break-Down Torque | 0.98 LB-FT |
| Pull-Up Torque | 0.47 LB-FT |
| Locked-Rotor Torque | 1.33 LB-FT |
| Starting Current | 10.6 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 26.0 | 42.0 | 52.0 | 61.0 | 68.0 | 73.0 | 77.0 | 75.0 | ||
| Efficiency | 0.0 | 38.7 | 49.2 | 55.9 | 59.9 | 60.2 | 59.8 | 60.0 | ||
| Speed (RPM) | 3,598 | 3,555 | 3,528 | 3,496 | 3,452 | 3,400 | 3,357 | 3,383 | ||
| Line Amps | 1.50 | 1.55 | 1.65 | 1.80 | 2.00 | 2.25 | 2.50 | 2.30 |
Parts
| 61B2D120189NNBA ELEC CAP, 189-227MFD, 12 | |
| 34CB4800SP | CAPACITOR COVER, STAMPED PRIMED |
| 34GS3000SP | GASKET, CAPACITOR BOX |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
