Description
Specs
| Catalog Number | L1306-50 |
|---|---|
| Enclosure | OPEN |
| Frame | 56 |
| Frame Material | Steel |
| Frequency | 50.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .750 HP @ 50 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3000 RPM @ 50 HZ |
| Voltage @ Frequency | 110.0 V @ 50 HZ 220.0 V @ 50 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR WEEE CSA CE |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 10.600 A @ 110.0 V 5.300 A @ 220.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 64.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 5.3 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3424L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 11.01 IN |
| Power Factor | 70 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 2850 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | L1306-50 |
|---|---|
| SPEC. | 34F17-3413 |
| HP | .75/KW .56 IEC60034-30 |
| VOLTS | 110/220 |
| AMP | 10.6/5.3 |
| RPM | 2850 1/MIN IP23 IC01 13KG |
| FRAME | 56 |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 64 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPEN |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.652 Ohms A Ph / 2.41 Ohms B Ph |
| Temp. Rise @ Rated Load | 68° C |
| Temp. Rise @ S.F. Load | 84° C |
| Start Configuration | DOL |
| Break-Down Torque | 3.2 LB-FT |
| Pull-Up Torque | 2.7 LB-FT |
| Locked-Rotor Torque | 4 LB-FT |
| Starting Current | 53 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 23.0 | 39.0 | 53.0 | 64.0 | 72.0 | 79.0 | 83.0 | 0.0 | ||
| Efficiency | 0.0 | 40.6 | 55.9 | 62.8 | 65.8 | 66.4 | 65.4 | 0.0 | ||
| Speed (RPM) | 2,987 | 2,960 | 2,931 | 2,899 | 2,863 | 2,820 | 2,769 | 0 | ||
| Line Amps | 7.80 | 8.10 | 8.70 | 9.50 | 10.70 | 12.20 | 14.00 | 12.20 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|
