Description
Specs
| Catalog Number | KENM3535 |
|---|---|
| Enclosure | TENV |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .330 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA CSA EEV NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 1.200 A @ 230.0 V 1.200 A @ 208.0 V .600 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 81.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 0.6 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3520M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 11.06 IN |
| Power Factor | 69 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1150 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | KENM3535 |
|---|---|
| SPEC. | 35E010P535G2 |
| HP | .33 |
| VOLTS | 230/460 |
| AMP | 1.2/.6 |
| RPM | 1150 |
| FRAME | 56C |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 81.5 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TENV |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 4.03 LB-FT |
| Pull-Up Torque | 3.03 LB-FT |
| Locked-Rotor Torque | 3.33 LB-FT |
| Starting Current | 2.88 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 11.0 | 33.0 | 50.0 | 61.0 | 69.0 | 72.0 | 74.0 | 71.0 | ||
| Efficiency | 0.0 | 66.9 | 77.7 | 80.7 | 80.8 | 80.2 | 78.1 | 80.4 | ||
| Speed (RPM) | 1,198 | 1,189 | 1,178 | 1,166 | 1,153 | 1,138 | 1,121 | 1,144 | ||
| Line Amps | 0.33 | 0.36 | 0.40 | 0.47 | 0.55 | 0.66 | 0.78 | 0.62 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|
