Description
Specs
| Catalog Number | JXL05222 |
|---|---|
| Enclosure | XPFC |
| Frame | 56J |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 10.500 A @ 230.0 V 11.500 A @ 208.0 V 21.000 A @ 115.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 75.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 10.5 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3540L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 17.94 IN |
| Power Factor | 77 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 35-0000-1104 |
|---|---|
| CAT.NO. | JXL05222 |
| HP | 2 |
| VOLTS | 115/208-230 |
| AMPS | 21/11.5-10.5 |
| RPM | 3450 |
| HZ | 60 |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| FRAME | 56J |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.192 Ohms A Ph / 1.53 Ohms B Ph |
| Temp. Rise @ Rated Load | 59° C |
| Temp. Rise @ S.F. Load | 69° C |
| Start Configuration | DOL |
| Break-Down Torque | 8.8 LB-FT |
| Pull-Up Torque | 3 LB-FT |
| Locked-Rotor Torque | 6.3 LB-FT |
| Starting Current | 131 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 22.0 | 46.0 | 64.0 | 75.0 | 80.0 | 83.0 | 85.0 | 82.0 | |||||||||||
| Efficiency | 0.0 | 64.7 | 74.6 | 77.1 | 78.2 | 77.6 | 75.4 | 77.8 | |||||||||||
| Speed (RPM) | 3,599 | 3,568 | 3,545 | 3,520 | 3,492 | 3,459 | 3,421 | 3,472 | |||||||||||
| Line Amps | 9.68 | 11.18 | 13.77 | 16.94 | 20.70 | 24.86 | 29.71 | 23.20 |
Parts
| EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |
|---|
