Description
Specs
| Catalog Number | JSL625A |
|---|---|
| Enclosure | OPSB |
| Frame | 56YZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 1.500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 11.000 A @ 208.0 V 18.000 A @ 115.0 V 9.000 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 72.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 9.0 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Terminal Panel |
| Motor Lead Termination | None |
| Motor Lead Quantity/Wire Size | 4 @ 14 AWG, A&J |
| Motor Type | 3524L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 13.43 IN |
| Power Factor | 75 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Pool Pump |
| Pulley Shaft Indicator | Ext Thread & Tapped Hole |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.30 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Fixed Opposite Standard |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 35E2011L466G1 |
|---|---|
| HP | 1.5 |
| VOLTS | 115/230 |
| AMP | 18/9 |
| RPM | 3450 |
| FRAME | 56YZ |
| SER.F. | 1.30 |
| NEMA-NOM-EFF | 72 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPSB |
Performance
| Break-Down Torque | 7.57 LB-FT |
|---|---|
| Pull-Up Torque | 6.05 LB-FT |
| Locked-Rotor Torque | 7.32 LB-FT |
| Starting Current | 108 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 21.0 | 41.0 | 57.0 | 67.0 | 75.0 | 80.0 | 83.0 | 81.0 | ||
| Efficiency | 0.0 | 49.0 | 64.0 | 70.8 | 74.1 | 74.4 | 74.6 | 74.4 | ||
| Speed (RPM) | 3,591 | 3,574 | 3,554 | 3,534 | 3,513 | 3,488 | 3,460 | 3,482 | ||
| Line Amps | 10.80 | 11.80 | 13.30 | 15.30 | 17.70 | 20.60 | 23.70 | 21.20 |
Parts
| CAPACITOR COVER, STAMPED X | |
| 35CB4500SP | TERMINAL BOX LID STAMPED |
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
