Description
Specs
| Catalog Number | JSL525A |
|---|---|
| Enclosure | OPEN |
| Frame | 56Y |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 12.600 A @ 115.0 V 6.300 A @ 230.0 V 7.500 A @ 208.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 70.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 6.3 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads With QC |
| Motor Lead Quantity/Wire Size | 5 @ 16 AWG |
| Motor Type | 3424L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 12.72 IN |
| Power Factor | 74 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Other |
| Pulley Shaft Indicator | Ext Thread & Tapped Hole |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.40 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Fixed Opposite Standard |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | EP |
| Winding Thermal 2 | None |
Drawings
Nameplate
| VOLTS | 115/230 |
|---|---|
| AMP | 12.6/6.3 |
| RPM | 3450 |
| FRAME | 56Y |
| SER.F. | 1.40 |
| NEMA-NOM-EFF | 70 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPEN |
Performance
| Pull-Up Torque | 2.82 LB-FT |
|---|---|
| Locked-Rotor Torque | 3.92 LB-FT |
| Starting Current | 74.9 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 20.0 | 38.0 | 53.0 | 66.0 | 74.0 | 80.0 | 85.0 | 83.0 | ||
| Efficiency | 0.0 | 47.2 | 61.9 | 68.5 | 70.7 | 70.8 | 69.8 | 70.2 | ||
| Speed (RPM) | 3,597 | 3,565 | 3,540 | 3,512 | 3,482 | 3,449 | 3,402 | 3,421 | ||
| Line Amps | 8.99 | 9.26 | 9.87 | 11.00 | 12.50 | 14.30 | 16.60 | 15.70 |
