Description
Specs
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
|---|---|
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 10.400 A @ 115.0 V 5.200 A @ 230.0 V 6.300 A @ 208.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 62.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 5.2 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads With QC |
| Motor Lead Quantity/Wire Size | 5 @ 18 AWG |
| Motor Type | 3420L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 11.97 IN |
| Power Factor | 74 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Other |
| Pulley Shaft Indicator | Ext Thread & Tapped Hole |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.50 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Fixed Opposite Standard |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | EP |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | JSL425A |
|---|---|
| SPEC. | 34M228R050G1 |
| HP | .75 |
| VOLTS | 115/230 |
| AMP | 10.4/5.2 |
| RPM | 3450 |
| FRAME | 56Y |
| SER.F. | 1.50 |
| NEMA-NOM-EFF | 62 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPEN |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.64683 Ohms A Ph / 2.6061 Ohms B Ph |
| Temp. Rise @ Rated Load | 31° C |
| Temp. Rise @ S.F. Load | 44° C |
| Start Configuration | DOL |
| Break-Down Torque | 3.62 LB-FT |
| Pull-Up Torque | 1.71 LB-FT |
| Locked-Rotor Torque | 2.19 LB-FT |
| Starting Current | 57.1 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 20.0 | 42.0 | 56.0 | 68.0 | 74.0 | 80.0 | 84.0 | 84.0 | ||
| Efficiency | 0.0 | 36.7 | 52.2 | 57.5 | 63.6 | 65.3 | 64.9 | 64.9 | ||
| Speed (RPM) | 3,595 | 3,561 | 3,537 | 3,511 | 3,482 | 3,450 | 3,409 | 3,409 | ||
| Line Amps | 7.66 | 7.98 | 8.39 | 9.44 | 10.30 | 11.70 | 13.50 | 13.50 |
Parts
| EC1216A02SP | ELEC CAP, 216-259 MFD, 125V, 1.48D X 3. |
|---|---|
| HA1005A05SP | SLINGER, OD 1.50, ID .659, 203 BRG |
| 34CB4800SP | CAPACITOR COVER, STAMPED PRIMED |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
