Description
Specs
| Catalog Number | JSL325A |
|---|---|
| Enclosure | OPEN |
| Frame | 56Y |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.300 A @ 230.0 V 4.400 A @ 208.0 V 6.600 A @ 115.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 70.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.3 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | G |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads With QC |
| Motor Lead Quantity/Wire Size | 5 @ 18 AWG |
| Motor Type | 3416L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 11.35 IN |
| Power Factor | 69 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Other |
| Pulley Shaft Indicator | Ext Thread & Tapped Hole |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.60 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Fixed Opposite Standard |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | EP |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | JSL325A |
|---|---|
| SPEC. | 34M228R049G1 |
| HP | .5 |
| VOLTS | 115/230 |
| AMP | 6.6/3.3 |
| RPM | 3450 |
| FRAME | 56Y |
| SER.F. | 1.60 |
| NEMA-NOM-EFF | 70 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPEN |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 3.388 Ohms A Ph / 2.78 Ohms B Ph |
| Temp. Rise @ Rated Load | 26° C |
| Temp. Rise @ S.F. Load | 43° C |
| Start Configuration | DOL |
| Break-Down Torque | 2.59 LB-FT |
| Pull-Up Torque | 1.87 LB-FT |
| Locked-Rotor Torque | 2.1 LB-FT |
| Starting Current | 12.7 A |
| Full Load Torque | 0 LB-FT |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 23.0 | 35.0 | 50.0 | 61.0 | 70.0 | 76.0 | 81.0 | 82.0 | |||||||||||
| Efficiency | 0.0 | 44.9 | 60.8 | 67.2 | 70.4 | 71.5 | 71.3 | 68.7 | |||||||||||
| Speed (RPM) | 3,599 | 3,569 | 3,546 | 3,522 | 3,495 | 3,464 | 3,428 | 3,383 | |||||||||||
| Line Amps | 2.52 | 2.57 | 2.70 | 2.99 | 3.31 | 3.74 | 4.24 | 4.56 |
Parts
| HA1005A05SP | SLINGER, OD 1.50, ID .659, 203 BRG |
|---|---|
| 34CB4800SP | CAPACITOR COVER, STAMPED PRIMED |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
