Description
Specs
| Catalog Number | JML1409T |
|---|---|
| Enclosure | OPEN |
| Frame | 184JM |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 5.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 21.000 A @ 230.0 V 22.700 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 80.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 21.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 12 AWG, A PH |
| Motor Type | 3634LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 16.50 IN |
| Power Factor | 96 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Tapped & Key |
| Rodent Screen | Included |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3500 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 36M927Q042G1 |
|---|---|
| HP | 5 |
| VOLTS | 230 |
| AMP | 21 |
| RPM | 3500 |
| FRAME | 184JM |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 80 |
| RATING | 40C AMB-CONT |
| DE | 6207 |
| ENCL | OPEN |
Performance
| Break-Down Torque | 15.44 LB-FT |
|---|---|
| Pull-Up Torque | 11.13 LB-FT |
| Locked-Rotor Torque | 16.11 LB-FT |
| Starting Current | 140 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 43.0 | 87.0 | 94.0 | 96.0 | 97.0 | 97.0 | 96.0 | 97.0 | ||
| Efficiency | 0.0 | 72.4 | 82.2 | 84.2 | 83.7 | 81.7 | 78.6 | 82.5 | ||
| Speed (RPM) | 3,595 | 3,572 | 3,547 | 3,518 | 3,485 | 3,445 | 3,395 | 3,461 | ||
| Line Amps | 3.94 | 6.53 | 10.47 | 15.01 | 20.06 | 25.69 | 32.41 | 23.40 |
Parts
| CYL OIL CAP 35MFD/370V | |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
| 36CB3800SP | CAPACITOR COVER, CAST |
