Description
Specs
| Catalog Number | JL3405A |
|---|---|
| Enclosure | TEFC |
| Frame | 56J |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .330 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 115.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.000 A @ 230.0 V 6.000 A @ 115.0 V 3.000 A @ 208.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 4 @ 18 AWG, A&J |
| Motor Type | 3416L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 11.85 IN |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Ext Thread |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.75 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Fixed Opposite Standard |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | JL3405A |
|---|---|
| SPEC. | 34-3099X609 |
| HP | .33 |
| VOLTS | 115/230 |
| AMP | 6/3 |
| RPM | 3450 |
| FRAME | 56J |
| SER.F. | 1.75 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEFC |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 1.9 LB-FT |
| Pull-Up Torque | 1.2 LB-FT |
| Locked-Rotor Torque | 1.4 LB-FT |
| Starting Current | 16 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 27.0 | 40.0 | 49.0 | 57.0 | 64.0 | 70.0 | 75.0 | 82.0 | ||
| Efficiency | 0.0 | 28.6 | 44.7 | 52.4 | 60.0 | 60.3 | 61.9 | 60.9 | ||
| Speed (RPM) | 3,579 | 3,560 | 3,544 | 3,527 | 3,508 | 3,483 | 3,460 | 3,433 | ||
| Line Amps | 2.40 | 2.50 | 2.60 | 2.70 | 2.90 | 3.15 | 3.40 | 3.65 |
Parts
| ELEC CAP, 130-156 MFD, 125V, 1.48D X 3.3 | |
| 34EP3102A01SP | FR ENDPLATE, MACH |
| 34CB4800SP | CAPACITOR COVER, STAMPED PRIMED |
| 34GS3000SP | GASKET, CAPACITOR BOX |
| 34EP3300A24SP | PU ENDPLATE, MACH |
| 34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
| 34FH4002A03SP | IEC FH NO GREASER W/.88 DIA SHAFT HOLE, |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
