Description
Specs
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
|---|---|
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 4.300 A @ 460.0 V 8.600 A @ 230.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.3 a |
| Front Face Code | Encoder/Feedback Device |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | L |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 6000 rpm |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 16 AWG |
| Motor Type | 0636M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 17.22 IN |
| Power Factor | 73 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT NO | IDNM3661T |
|---|---|
| SPEC. | 06F551X370G2 |
| FRAME | 184TC |
| VOLTS | 230/460 |
| MAG CUR | 4.8/2.4 |
| RPM | 1760 |
| HZ | 60 |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 89.5 |
| RATING | 40C AMB-CONT |
| DE BRG | 6206 |
| CC | 010A |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 3.58 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 74° C |
| Start Configuration | DOL |
| Break-Down Torque | 38.41 LB-FT |
| Pull-Up Torque | 18.91 LB-FT |
| Locked-Rotor Torque | 22.4 LB-FT |
| Starting Current | 34.2 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 34.0 | 53.0 | 65.0 | 73.0 | 78.0 | 82.0 | 0.0 | ||
| Efficiency | 0.0 | 81.6 | 88.7 | 90.2 | 90.4 | 90.1 | 88.5 | 0.0 | ||
| Speed (RPM) | 1,799 | 1,791 | 1,783 | 1,774 | 1,765 | 1,755 | 1,741 | 0 | ||
| Line Amps | 2.45 | 2.65 | 3.02 | 3.60 | 4.28 | 5.01 | 6.06 | 0.00 |
Parts
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
|---|---|
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
